This shampoo really works! Foams great, a little goes along way and it cleaned up the water spots on the windows. The hydrophobics of my ceramic coating does seem a bit better
RESET YOUR PAINT.
Acidic pre-wash foam that dissolves hard water minerals, road film, and stubborn buildup before your contact wash.
Restores Gloss
Removes buildup that leaves paint looking dull and lifeless.
Dissolves Hard Water Spots
Breaks down mineral deposits and hard water residue.
Unclogs Ceramic Coatings
Clears contamination so coatings can bead and sheet properly again.
Removes Road Film
Cuts through stubborn traffic film and environmental grime.
Why choose
Brug's?
Brug's
Others
304 Stainless Steel Construction
Soft Rubber Edges to Protect Your Paint
Hard Plastic That Can Dent Your Paint
High Flow 4.0 Orifice
Large Guard for Easy Grip
Slippery and Easy to Drop
Color-Coded for Quick Identification
Cheap Metal That Rusts
Fast 2-5 Day Delivery
Performance Guaranteed
15,000+ Detailers Trust Brug's
Frequently Asked Questions
Will AcidWash strip my wax or sealant?
AcidWash is designed to remove mineral deposits, road film, and contamination from the surface.
In some cases this cleaning process may reduce weaker waxes or older sealants, especially if they are already near the end of their lifespan. Ceramic coatings are generally unaffected and often benefit from the removal of buildup that can block hydrophobic performance.
In some cases this cleaning process may reduce weaker waxes or older sealants, especially if they are already near the end of their lifespan. Ceramic coatings are generally unaffected and often benefit from the removal of buildup that can block hydrophobic performance.
How often should I use AcidWash?
Recommended Use
AcidWash is designed as a periodic deep-clean step to remove mineral buildup and road film that regular soaps can’t fully remove.
Many users apply it:
• Occasionally when mineral buildup or water spots appear
• When preparing a surface before protection
• When hydrophobic behavior starts to decline
• Before claying or polishing
AcidWash is designed as a periodic deep-clean step to remove mineral buildup and road film that regular soaps can’t fully remove.
Many users apply it:
• Occasionally when mineral buildup or water spots appear
• When preparing a surface before protection
• When hydrophobic behavior starts to decline
• Before claying or polishing
What is Brug’s AcidWash used for?
Brug’s AcidWash is an acidic pre-wash foam designed to dissolve hard water spots, mineral buildup, and road film that regular soaps struggle to remove. It resets the surface so your paint, glass, and coatings can perform properly again.
Is AcidWash safe for my paint?
Yes. AcidWash uses a controlled acidic formula designed for automotive surfaces. When used as directed, it is safe on paint, glass, wheels, and clear coat.
Can I use AcidWash on ceramic coatings?
Yes. In fact, AcidWash is ideal for coated vehicles because it removes mineral buildup and contamination that can clog coatings and reduce hydrophobic performance.
Will this remove hard water spots?
AcidWash helps dissolve mineral deposits and reduce hard water spots, making them much easier to remove during washing.
Severely etched water spots may require polishing.
Severely etched water spots may require polishing.
Do I need a foam cannon to use it?
No. AcidWash works with:
• Foam cannons (pressure washers)
• Garden hose foam guns
• Traditional bucket washes
A foam cannon provides the best coverage and dwell time, but it is not required.
• Foam cannons (pressure washers)
• Garden hose foam guns
• Traditional bucket washes
A foam cannon provides the best coverage and dwell time, but it is not required.
Does AcidWash leave streaks or residue?
No. AcidWash is formulated to rinse completely clean with no film or residue when properly rinsed.
Can I use this in direct sunlight?
For best results, wash your vehicle in a cool, shaded area.
However, if the product starts to dry on the surface in direct sunlight, simply rinse the panel with clean water, and AcidWash will rinse away without leaving marks.
However, if the product starts to dry on the surface in direct sunlight, simply rinse the panel with clean water, and AcidWash will rinse away without leaving marks.
What surfaces can I use AcidWash on?
AcidWash is safe for most exterior automotive surfaces including:
• Paint
• Glass
• Wheels
• Clear coat
• Ceramic coatings
Avoid using on bare aluminum or sensitive unfinished metals.
• Paint
• Glass
• Wheels
• Clear coat
• Ceramic coatings
Avoid using on bare aluminum or sensitive unfinished metals.
Where is Brug’s AcidWash made?
AcidWash is professionally formulated and filled in the USA.
-
Brug’s™ AcidWash Pre-Wash Foam | Acidic Car Wash for Water Spots, Mineral Deposits & Surface Decontamination
Remove stubborn mineral buildup and restore your vehicle’s finish with Brug’s AcidWash. This acidic pre-wash foam is designed to break down water spots, hard water minerals, and embedded contamination on paint and glass, helping you achieve a truly clean surface before your main wash or protection step.
Acidic Pre-Wash for Deep Cleaning
-
Breaks down water spots, mineral deposits, and chemical residue
-
Targets contamination that standard car soaps can’t remove
-
Ideal for restoring neglected or coated surfaces
Surface Reset & Coating Performance
-
Helps unclog coatings and restore hydrophobic behavior
-
Prepares paint for wax, sealant, ceramic coatings, or polishing
-
Leaves behind a clean, bare surface for better bonding
Restores Gloss & Clarity
-
Removes buildup that dulls paint and glass
-
Enhances shine by revealing a smooth, clean surface underneath
Versatile Application
Compatible with:
-
Foam cannons (pressure washers)
-
Foam guns (garden hose setups)
-
Traditional bucket washes
Streak-Free Rinse
-
Rinses clean without leaving residue or film
-
Safe when used as directed on paint and exterior surfaces
Why Use AcidWash
Standard soaps remove dirt, but they don’t remove mineral buildup. AcidWash is designed to handle what regular washes leave behind, making it a key step for deeper cleans and proper surface prep.
Product Details
-
Type: Acidic pre-wash foam
-
Use: Paint, glass, exterior surfaces
-
Made in USA
-
Customer Reviews
Overall rating: 5.0 / 5 from 5 reviews.
Love the 3ph system. The Acid wash helped a lot with water spots. Highly recommend the system.
Works very well. My top 3 ACID wash products.
Works great will remove water spots from glass, Im not sure about if its old and etched as mine was not that bad but water spots that would not wash off disappeared. use foam canon and mix per instructions.
Some of my first use with the acid. I mixed as directed, and it removed water spots from all the glass, awesome and eliminated that job to hand polish all the windows. Although it removed some from paint, it was only the condition of the paint that called for me to buff them out. I would assume if i used it sooner it would remove them from paint as well.
Ships Next Day
2-5 Day Delivery
Free US Shipping $130+
Ships Next Day
2-5 Day Delivery
Free US Shipping $130+
Ships Next Day
2-5 Day Delivery
Free US Shipping $130+
Ships Next Day
2-5 Day Delivery
Free US Shipping $130+
