THICK FOAM.
EFFORTLESS CLEAN.

Maximum Thickness. Minimum Effort. Built to Last.

Wide-Neck Easy Fill Quick-refill bottle with weighted filter ball for zero waste.
1/4 Turn Quick-Attach Lid V2 leak-proof lid locks on fast with zero cross-threading.
Ultra-Thick Double Aeration Foam Dual-valve system maximizes foam thickness for pro-level coverage.
Stainless Steel & Aluminum Build Corrosion-resistant construction that outlasts harsh chemicals.
Brug's® V2 Pro Foam Cannon
Why choose Brug's?
Brug's Brug's
Others
304 Stainless Steel Construction
Soft Rubber Edges to Protect Your Paint
Hard Plastic That Can Dent Your Paint
High Flow 4.0 Orifice
Large Guard for Easy Grip
Slippery and Easy to Drop
Color-Coded for Quick Identification
Cheap Metal That Rusts
Fast 2-5 Day Delivery Performance Guaranteed 15,000+ Detailers Trust Brug's

Frequently Asked Questions

What’s the difference between the purple and clear foam cannon?
The purple cannon is shorter with a wider base, making it more stable and drop-resistant. It’s made from HDPE plastic for added durability.
The clear cannon is taller and made from transparent PET plastic, allowing you to easily see soap levels inside the bottle.
Does thicker soap always mean better foam?
Not always. Foam thickness depends on multiple factors including soap quality, pressure washer PSI, and dilution ratio. A good soap and proper ratio make the biggest difference.
Do I need to change the orifice or filter for better foam?
Most likely not. We include both a 1.0mm and 1.2mm orifice, so most setups will be ready to go right out of the box.

The smaller orifice works best with lower PSI electric washers, while higher PSI units typically run great with the stock setup.
How much soap do I put in the foam cannon?
This depends on the soap.

For Brug’s HyperFoam:
Only 1 oz. Yes, really.

For most other soaps:
A 1:10 ratio usually works well. Some cheaper soaps may require more product to get thick foam.
What’s included with the Pro Foam Cannon?
The bundle includes the Pro Foam Cannon with a dual‑valve aeration head, a weighted steel filter ball, a wide‑neck HDPE bottle, two orifice jets (1.0 mm and 1.2 mm), a spare mesh filter, and a universal ¼" quick‑connect fitting. You’re ready to foam straight out of the box.
Will this work with my pressure washer?
Yes. The Pro Foam Cannon uses a standard ¼" quick‑connect, which fits 95% of pressure washer guns. The two included orifices (1.0 mm for lower‑GPM pressure washers and 1.2 mm for higher‑GPM units) ensure thick foam across a wide range of machines.
Do I still need to hand wash after foaming?
Most of the time, yes, there are some more powerful "touchless soaps," but even those may require a light contact wash with a clean microfiber mitt for a spotless finish. Foam loosens and encapsulates dirt but doesn’t remove it all.
How should I dry the car after using the foam cannon?
Use a plush microfiber drying towel or a touchless blower. Avoid bath towels or dragging cheap microfiber across the paint, which can cause scratches.
How do I maintain my foam cannon?
Rinse the cannon with clean water after each wash, and replace filters as needed. Proper maintenance keeps performance strong and extends life.
If you want to do a full deep clean, you can lubricate the O‑rings and deep clean the internals with diluted vinegar.
How long will it last?
Built with premium materials, the Brug's V2 Pro Foam Cannon is designed to last many years with proper care. While cheap plastic models often fail after just a single season, our heavy-duty metal construction and included spare parts guarantee years of reliable, thick foam. Backed up by our warranty and lifetime parts support.
Do I need to change the orifice for better foam?
The cannon comes with two orifices. Use the smaller 1.0 mm for lower‑GPM units and the 1.2 mm for higher‑GPM pressure washers. Swapping orifices is quick and typically all you need to dial in foam thickness.
What’s the warranty and parts availability?
The Pro Foam Cannon includes a 1‑year warranty and lifetime parts support. Replacement bottles, orifices, filters and lids are available so you can keep foaming for years.

Customer Reviews

Overall rating: 4.8 / 5 from 88 reviews.

Customer video review of Brug's® V2 Pro Foam Cannon

Absolutely amazing product! Produces insanely thick foam, honestly didn’t expect too much since they weren’t that expensive but I’m shocked! The first car I used them on was a BMW M3 g80, and as you can see in the video it worked wonders. Once again, amazing product and would highly recommend! I’m about to purchase my third one😆

Brug's® V2 Pro Foam Cannon

Customer photo review of Brug's™ V2 Pro Foam Cannon

The brugs clear foam cannon is amazing best foam cannon I've ever used.

Brug's™ V2 Pro Foam Cannon

Customer photo review of Brug's™ V2 Pro Foam Cannon

Fantastic foam, sultry suds, and tastefully thicc. Well. I didn't taste it but it's pretty dang good. And doesn't immediately slide off the paint.

Brug's™ V2 Pro Foam Cannon

Customer photo review of Brug's™ V2 Pro Foam Cannon

Saw these stickers and had to have them, perfect for foam cannons and pump sprayers/foamers….looks great

Brug's™ V2 Pro Foam Cannon

Customer photo review of Brug's™ V2 Pro Foam Cannon

Just what I needed highly recommend. The box was really detailed and good looking, doesn’t leak, and have indents for hands on bottle.

Brug's™ V2 Pro Foam Cannon

Customer photo review of Brug's™ V2 Pro Foam Cannon

We tried this out while using Turtle Wash and Wax product in it. It was really nice and foamy, especially on the highest setting! It was pretty easy to figure out how to use and came in a really nice, padded box! I would recommend!

Brug's™ V2 Pro Foam Cannon

Customer photo review of Brug's™ V2 Pro Foam Cannon

This is a well constructed foam cannon. It came nicely packaged with detailed instructions. This was helpful, because my 1800psi Active pressure washer was surging with the orifice that was installed upon delivery. After switching out the orifice I shot the video. I only used 1oz of snow foam initially to see the result. The foam was nice, but even with the air admittance maxed out, the foam was still a little flat and wet. I suspect it would improve with another ounce or 2 of soap in the gun. I accidentally tested it’s durability, because as I was setting up the iPad to take video in different positions, I accidentally knocked this off my workbench 3 times from about 4 1/2 feet off the ground. This came out unscathed, with only a small plastic scuff from the gravel driveway. Overall I am pleased, and I feel the performance will improve with a little experimentation with soap amounts.

Brug's™ V2 Pro Foam Cannon

Customer photo review of Brug's™ V2 Pro Foam Cannon

Did I mention is purple? Was already sold with the color, but it's built well. I've dropped it a few times and no issues. Nice foam, holds enough soap for 2-3 washes

Brug's™ V2 Pro Foam Cannon

Customer photo review of Brug's™ V2 Pro Foam Cannon

This is a super underrated foam cannon! It foams just as much as my $90 MJJC. Can't recommend enough!

Brug's™ V2 Pro Foam Cannon

Customer photo review of Brug's™ V2 Pro Foam Cannon

Used it today. It throws a THICK cover of foam into the car. I didn’t have to scrub the road grime at all. Just foam, sit, and rinse. Great product. Highly recommend!

Brug's™ V2 Pro Foam Cannon

Customer photo review of Brug's™ V2 Pro Foam Cannon

This is probably the nicest foam canon I have used upto yet. I have had a few other known brands and they work well but this is on a higher level quality wise. I like the weighted ball end on the pickup tube and the spray width control knob works smoothly and is not too lose. The bottle is nice and think plastic and the pressure washer end fits well into my pressure washer. 10/10 on foam production and thickness.

Brug's™ V2 Pro Foam Cannon

Great foam cannon! I love the ease of locking it on and the fact that it's clear makes it easier to know exactly how much product is left. Love the purple as well.

Brug's™ V2 Pro Foam Cannon

Absolutely amazing hands down I got shaving cream with just my ryobj with 1.2gpm and some meguiers gold class

Brug's™ V2 Pro Foam Cannon

Very thick foam, very light weight i use cherry foam and it is very good. Would purchase again

Brug's™ V2 Pro Foam Cannon

One of my favorite foam canons an I love the color. Great build and easy to install and get it going.

Brug's™ V2 Pro Foam Cannon

I've used Armor All, Chemical Guys and now Brug's. I find the Brug's is the best for my needs. The adjustable nozzle, bottle design, weighted suction hose and quality of product are quite impressive. Creates massive foam. I don't believe it really matters which soap you use, Adam's, Mequires etc...So far it has been worth the money. I use with a 3000 psi Ryobi pressure washer.

Brug's™ V2 Pro Foam Cannon

Es un excelente espumador vale toda la pena hasta cobarde jabones baratos tira muy buena espuma

Brug's™ V2 Pro Foam Cannon

Been using this new gun in my van for a few months now, the swivel is still smooth as ever.

Brug's™ V2 Pro Foam Cannon

If it's not assembled correctly, it won't work properly. And it's difficult to see how to assemble it for someone who doesn't know about this. Otherwise, I love it.

Brug's™ V2 Pro Foam Cannon

Great quality very well made doesn’t feel like cheap plastic great construction

Brug's™ V2 Pro Foam Cannon

Makes great foam, saving up for their swivel gun next. the flexible pick up tube makes it easy to use at any angle and i love how it’s got a good base so it doesn’t tip over like the other foam cannons also the quick screw on cap is amazing.

Brug's™ V2 Pro Foam Cannon

Ships Next Day
2-5 Day Delivery
Free US Shipping $130+
Ships Next Day
2-5 Day Delivery
Free US Shipping $130+
Ships Next Day
2-5 Day Delivery
Free US Shipping $130+
Ships Next Day
2-5 Day Delivery
Free US Shipping $130+